Description
So, you probably already know that you want an intercooler with maximum cooling and minimum restriction, but when it comes to selecting the right ‘man for the job’, we think it’s important to understand why. As air is pressurized by your turbo, it heats up, not because of the heat of the turbocharger, but because when they’re compressed, the atoms in the air are forced closer together and as a result, move faster and have more energy. That energy manifests itself as heat. The more heat we can remove from the system, the denser the air becomes and that’s what helps eliminate pre-detonation, or ‘knock’, allowing for increased output from your system. Your OEM TMIC does just fine at stock boost under normal use, but as soon as you start putting some real heat into it with higher boost or harder use, it heat-soaks beyond recovery.
*Quick Specs*
* Smooth End Tank Internal Contours – Designed for maximum flow
* Machined Throttle Body Connection – Tight, leak and trouble-free seal
* Machined Flange Faces and Internal Bores – Maximum pressure-tightness and unrestricted flow
* Permanent Mold End Tank Tooling and Casting – Allows much tighter tolerances and higher strength
* Stainless Steel Threaded Inserts – Prevent cross-threading or damaged threads
* High-Density, High-Flow Core – Optimizes heat transfer and minimizes flow restriction for turbo Subarus
* Cleaned, Inspected and Sealed Prior to Shipping – Prevent Motor Damage Due To Foreign Matter
Question
tristanarnar –
Does the intercooler come with a Y pipe to the turbo
(0) (0) Watch Unwatch
Brian Millican –
It does not come with the Y pipe for this product. The product shows it does include this:
Silver core finish
Bar and plate core design
Smooth end-tank internal contours provide maximum flow
Machined throttle body connection provides a tight and trouble-free seal
Machined flange faces and internal bores provide maximum pressure-tightness with unrestricted flow
Permanent mold end-tank tooling and casting allows for tighter tolerances and higher strength
Stainless-steel threaded inserts prevent cross-threading or damaged threads
High-density and high-flow core optimizes heat transfer and minimizes flow restrictions
Flows over 1500 CFM
Supports power levels up to 575 WHP
Pressure tested up to 50 PSI
Thoroughly cleaned and inspected before shipment
Will include the GrimmSpeed Inlet and BPV gaskets
(0) (0)